On mine from 1981, it's a Jabsco pump # 2760-0001 and the cover and gasket numbers are 12066-0000 and 1189-0000 If you're talking about the belt driven pump mounted on the engine. Andy Peregrine C&C 40
On Tue, Oct 22, 2013 at 2:47 PM, Bill Connon <billcon...@navigue.com> wrote: > Group, > > On haulout this year I noticed water drops from the seawater pump. I > changed the bearings and seal and afterwards the pump would no longer self > prime. I changed the impeller and was able to pump water using a 600 RPM > half inch drill but the boat motor would not self prime and pump > anti-freeze through the system. > I want to buy a new cover, gasket and cam but can't come up with the > proper part numbers. A call to the nearest Yanmar dealer did not help but I > assume that it is a Johnson pump ( from what I found on the web ) and it > was using a Johnson 827 impeller. > The motor is a 3GMF from 1985and the impeller is 2" OD x 7/8" wide and has > a 1/2" bore with a keyway. > All help with getting the proper part numbers would be appreciated. > > Bill > Caprice 1 > 1978 C&C 36 > > ______________________________**_________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
