I had the same problem. 
3 or 4 tries and it would start,  â€Žbut a little disconcerting. 
Wiring was 30+ years old so I replaced all battery to starter/1,2,all switch /engine ground wires. Bought them pre made with battery clamps and end connectors from auto section in Canadian Tire ($90 about) 
Turns over first time, every time now!

‎Sam Salter 
C&C 26 Liquorice 
Ghost Lake Alberta 

From: Indigo
Sent: Friday, September 20, 2013 9:49 AM
To: cnc-list@cnc-list.com
Reply To: cnc-list@cnc-list.com
Subject: Stus-List Yanmar 3GMF Starting Problem

Recently Indigo has developed what is currently annoying problem, but could become more serious.  After turning the key (and getting the low oil-pressure buzzer), when I press the starter button, absolutely nothing happens.  I press it again, and it usually starts right up. Occasionally more pushes on the button are required.  Is the remedy going to be simply replacing the push-button ignition switch or am I likely facing something more to fix?

 

Indigo – 36MKIII

Southport CT  

 

 

 

 


_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to