Ed, do you know what the diameter of the transducer is?      1-5/8 or 1- 1/4?

Thanks,  from Terry on behalf of Fred...

From: Ed Levert 
Sent: Saturday, September 07, 2013 3:53 PM
To: cnc-list@cnc-list.com 
Subject: Re: Stus-List Airmar speed transducers

Fred:

Spent the PM changing fuel filters. Hope the transducer works. I will put it in 
the mail on Monday.

The transducer came from a C&C 30 Mk 1 I bought in 2006. A prior owner had 
installed the speed and depth transducers with a piece of  plywood on the 
outside of the hull. On the next haulout, the plywood was too spongy. 5200 had 
been used to seal the installation and the boatyard broke the through hull 
trying to remove it. So I ended up owning a new transducer and new through 
hull. The one I am sending was working when last in use. It has the 5 pin plug. 
If it works, I am happy to get it off my shelf as I have too many boat parts 
"in stock." I hope it will work for you.

Ed

  

 


--------------------------------------------------------------------------------

From: CnC-List on behalf of Fred Hazzard
Sent: Saturday, September 7, 2013 1:36 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Airmar speed transducers 

Ed:   Great.  Thank you very much.  My address is:



Fred Hazzard

3232 SE Raymond St.

Portland, Or 97202



Fred



From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ed Levert
Sent: Saturday, September 07, 2013 7:43 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Airmar speed transducers



Fred:

I have an Airmar transducer but as near as my eyes can see, it looks to be 1 
1/2" in diameter. If you can use it or even want to try, its yours. Send me 
your mailing address.

Ed Levert
Briar Patch C&C 34
New Orleans
elev...@grayinsco.com


--------------------------------------------------------------------------------

From: CnC-List on behalf of Fred Hazzard
Sent: Friday, September 6, 2013 11:12 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Airmar speed transducers 



I am in need of an Airmar speed transducer.  It needs to be the older 800 
series that reads boat speed and temp.  Further it needs to be an older unit 
that is 1 5/8” in diameter.



Anybody have an older working unit in your surplus boat gear?



Fred Hazzard

S/V Fury

Portland, OR



--------------------------------------------------------------------------------
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Terry Johnson
S/V Ozymandias
E-mail: tj...@comcast.net
Website: www.tj622.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to