I have had the Forespar for years.  It is mounted high enough to avoid spray.  
No problems. 

1981 40-2.   
                                                      David F. Risch
(401) 419-4650 cell

-----Original Message-----
From: dre...@gmail.com
Date: Thu, 5 Sep 2013 17:56:59 
To: <cnc-list@cnc-list.com>
Subject: Re: Stus-List replacing steaming old light

Dennis,


                Thanks for the info.      Another question:    Are you happy 
with the Aquasignal?    I was deciding between the Forespar ML-2, Hella 8505, 
and the AquaSignal Series 25.   I  decided on the Hella based on some bad 
reviews I found online for the other two.   The Forespar had reports of top 
lens falling out while tacking and the AquaSignal was stated as not having any 
spray protection for the deck light bulb and so bulbs corroded and died 
prematurely.   





 -
Paul E.
1979 C&C 29 Mk1
S/V Johanna Rose
Carrabelle, FL 


On Sep 5, 2013, at 10:49 AM, cnc-list-requ...@cnc-list.com 
<mailto:cnc-list-requ...@cnc-list.com>  wrote:
Message: 10
Date: Thu, 5 Sep 2013 07:49:51 -0700 (PDT)
From: "Dennis C." <capt...@yahoo.com <mailto:capt...@yahoo.com> >
To: "cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> " 
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> >
Subject: Re: Stus-List replacing steaming old light
Message-ID:
        <1378392591.1503.yahoomail...@web121903.mail.ne1.yahoo.com 
<mailto:yahoomail...@web121903.mail.ne1.yahoo.com> >
Content-Type: text/plain; charset="iso-8859-1"

Paul,

If it is like the one on Touche's mast, I abandoned it.? It was that same Perko 
all around light mounted on a metal "donut" welded to the mast.? I installed an 
Aquasignal Series 25 combo steaming/foredeck light a bit above the old fixture 
and dropped new wires.? 

I'm guessing the Aquasignal would fit over and hide the existing donut once you 
remove the Perko light if you wanted to mount it in the same spot.? You could 
use the existing wires to pull the new wires.

On a side note, Touche's pole topping lift exited another of those "donut" 
things above the steaming light.? I have also abandoned that and installed an 
exit box with sheave for the topping lift.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to