Gary,
My Martec does fine in reverse, I just have to run the rpms up to about
3,000 for it to respond. Once I get some sternway, everything is fine. It
certainly doesn't back down like a solid prop, but I love the low drag
properties.
Jake
Jake Brodersen
C&C 35 Mk-III
Midnight Mistress
Hampton VA
-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary
Nylander
Sent: Tuesday, August 13, 2013 4:54 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List WHAT size of props should I put on my C&C 30MK 1
My 30-1 with a 2QM15 came with a 13.5 x 9 fixed prop. The Martec props are
not noted for good thrust in reverse.
Gary
----- Original Message -----
From: "Curtis" <cpt.b...@gmail.com>
To: <CnC-List@cnc-list.com>
Sent: Tuesday, August 13, 2013 3:29 PM
Subject: Stus-List WHAT size of props should I put on my C&C 30MK 1
I have just put a 2gm20F 18 hp
taking out a 2GM 13hp.
I have a Prop15Dx9P2 mertec folding prop. It has little to no reverst
and very little thrust foward? What is a good choice for a 2 ot 3
fixed blade prop for a 1981 C&C 30 MK1 with a 2gm20F and a kanzai
KM2P.
Thanks for your help
--
"The pessimist complains about the wind; the optimist expects it to
change; the realist adjusts the sails."
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
