Lanacote works well to prevent corrosion between SS and Aluminum.
Chuck Resolute 1990 C&C 34R Atlantic City, NJ ----- Original Message ----- From: "John and Maryann Read" <johnpr...@comcast.net> To: cnc-list@cnc-list.com Sent: Thursday, July 25, 2013 10:34:48 PM Subject: Re: Stus-List HELP aluminum bolt Mike Stainless and aluminum = lots of corrosion. John and Maryann Legacy III 1982 C&C 34 Noank, CT From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Neil Gallagher Sent: Thursday, July 25, 2013 9:26 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List HELP aluminum bolt MIke: stainless at Bolt Depot: http://www.boltdepot.com/Machine_screws_Slotted_flat_head_Stainless_steel_18-8_1_2-13.aspx Neil Gallagher 35-1 Weatherly Glen Cove, NY On 7/25/2013 9:09 PM, Persuasion wrote: Help I was working on my pedestal this past weekend and one of the aluminum bolts only loosened about 1 1/2 turns then seized. All I could do was drill it out. Now I’m having difficulty finding a replacement. I called Edson and they advised me that they no longer carry the 6” bolt. Thanks C&C for making an extra heavy cockpit sole. So does anyone know where I can source a flat head 1/2” X 6” (5” would work) aluminum bolt. If a pinch I would use a stainless. Thanks Mike S/V Persuasion C&C 37 Keel/CB Long Sault _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
