I"m guessing that Harken furler wouldn't be able to be converted to fit a 30,
correct???
Ron
Wild Cheri
STL
________________________________
From: Dennis C. <capt...@yahoo.com>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Sent: Tuesday, July 16, 2013 8:57 AM
Subject: Re: Stus-List Harken furler for sale cheap
You should be. A new Harken Unit 1 Mk IV sells for over $2300.
Dennis C.
>________________________________
> From: "Della Barba, Joe" <joe.della.ba...@ssa.gov>
>To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
>Sent: Tuesday, July 16, 2013 8:45 AM
>Subject: Re: Stus-List Harken furler for sale cheap
>
>
>I don't even really need it and I am pretty tempted at $400.
>
>Joe Della Barba
>
>-----Original Message-----
>From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike
>Sent: Tuesday, July 16, 2013 8:19 AM
>To: cnc-list@cnc-list.com
>Subject: Re: Stus-List Harken furler for sale cheap
>
>Rick
>
>Is worth a lot more than $500 if all parts in place and in like new
>condition. I sold a 10 year old Harken 00 for $750 last year and the furler
>for a 38 ft masthead boat is considerably more furler than that.
>Do your friend a favour and sell it for $1000 since it costs a lot more than
>that new
>
>Mike
>
>-----Original
Message-----
>From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass
>Sent: Tuesday, July 16, 2013 12:11 AM
>To: cnc-list@cnc-list.com
>Subject: Re: Stus-List Harken furler for sale cheap
>
>The talk about Ultrafurl and Harken furlers on the list reminded me of
>something I'd been asked to do:
>
>A friend of mine had a Catalina 38 with an old Hood furler for which parts
>were no longer available. He bought himself a Harken furler (model
>unknown)
>with 50+ feet of luff extrusion to install on his boat, and then the boat was
>totaled in Hurricane Irene a couple of years ago.
>
>He still has the furler in the overhead of his garage, and asked if I know
>anyone who might want to buy the furler. I believe he only wants $400 or
>$500
for it. The extrusions are in 6 foot sections, so the furler should be
shippable by UPS at a fairly reasonable cost.
>
>If anyone is interested in talking to my friend, please let me know off list
>and I will put you in contact with each other.
>
>
>Rick Brass
>Washington, NC
>
>
>
>
>
>
>_______________________________________________
>This List is provided by the C&C Photo Album http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>_______________________________________________
>This List is provided by the C&C Photo Album http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
