Thanks, Bill.. I will look at the NFM ports today..Do you have the model number for the ports that you used? Thanks Jack In a message dated 7/8/2013 9:26:04 A.M. Eastern Daylight Time, colt...@verizon.net writes:
Jack, I replaced 12” forward salon Ports with NewFound Metals ports, had them shorten the spigot from 2” to 1 ½” . They fit almost perfectly, maybe had to drill one new hole. Although, I think the hatches the replaced were white coated aluminum Bomars. Bill Coleman C&C 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of honeys...@aol.com Sent: Sunday, July 07, 2013 6:25 PM To: cnc-list@cnc-list.com Subject: Stus-List HELP - Fuller Brusk portlight source Hello List Honey has 3 Fuller Brush manufactured portlights (2 x 12" in the cabin and 1 x 18" in the port quarter berth) the boat came from C&C Yachts with this brand installed at the factory. I have replaced them twice if the past 34 years, each time directly from Fuller Brush once by phone and the second time back in 2006 or so I ordered them on line Now I would like to replace just the outside trim rings due to a couple of small spider cracks caused by the painter over tightening the fastener when the decks were repainted this winter. I looked up Fuller Brush on line and the company's main site continues to show the marine parts but offers no link to place an order. I have spare gaskets and lenses, but no trim rings and the little cracks are driving me nuts... Also, I saw a post about a chapter 11 bankruptcy filing. I would appreciate any assistance offered as to how do I order the parts or even if I can still buy these portlights and or parts for them. With my usual bad luck I doubt that there is no one makes a portlight that will simply drop in place. Thoughts, comments?? Thank you. Jack Fitzgerald C&C 39 TM HONEY Savannah, GA _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
<<inline: image001.gif>>
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
