Apparently, the motor starts - so there is electricity to the starter. Do the indicator lights on the 'dash' light up? I know on my 2qm, I can turn off the ignition and the engine runs, but the tach doesn't work, but the lights do work. Start at the back of the dash - unfortunately if yours is like mine, there are a bunch of wires led into bundles and some of those don't do anything. You should be able to see the wire out of the tach.
It could be the rpm sensor on the flywheel as well. Gary 2qm on a 30 ----- Original Message ----- From: McElwreath, Daniel To: cnc-list@cnc-list.com Sent: Saturday, July 06, 2013 8:03 AM Subject: Stus-List tach and c0aming question Any advice appreciated--Tively II is a C& C 32 with a 2qm yanmar. The tach is no longer registering rpm. Not sure if this is an electrical (ie loose wire) or whether it simply wore out. Any suggestions on diagnosing? Second question-- I am going to install a bimini, , one connection to the coaming on each side. Any thoughts on whether I have to put a backing plate under the coaming( is there access)? or can I just screw into the coaming?? Thanks for any suggestions. Dan Mc on City Island. ------------------------------------------------------------------------------ _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
