Thanks, the tech at Mackay Electronics made the same comment
 
Jack Fitzgerald
C&C 39 TM
HONEY
US12788
 
 
In a message dated 6/26/2013 8:37:31 A.M. Eastern Daylight Time,  
joe.della.ba...@ssa.gov writes:

 
The  SMA connector is not very strong compared to the BNC. The short cable 
adapter  you have is likely a better idea. 
 
Joe  Della Barba
Coquina 
C&C  35 MK I 
 
 
From: CnC-List  [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of  
honeys...@aol.com
Sent: Wednesday, June 26, 2013 8:16  AM
To: billb...@sbcglobal.net;  cnc-list@cnc-list.com
Subject: Re: Stus-List Hand held radio antenna  adaptor

 
All,
 

 
Thanks  for the support. We made up a 2 foot section of co-ax with a SMA 
connect on 1  end and a female 259 connector on the other end. Problem solved 
and the total  costs was less than USD 15.00.
 

 
I do  have to wonder why no one (that I could locate) makes a simple one 
piece  connector for these hand held radios so that you can use the HH as an  
emergency back up. Strange..
 

 
Thanks  again for the hot and steamy deep Southern USA
 

 
Jack  Fitzgerald
 
C&C  39TM
 
HONEY
US12788
 

 
 
In a  message dated 6/26/2013 7:44:11 A.M. Eastern Daylight Time, 
_billbina@sbcglobal.net_ (mailto:billb...@sbcglobal.net)   writes:

 
Although  Neill-Concelman is technically and pedantically correct, 
overwhelming common  usage is Navy or Naval. Yes, I am a long time licensed 
electronic  tech.  If you expect the majority of people including Radio 
Technicians  
to understand what you want, you call it a Bayonet Naval Connector or  
Threaded Naval Connector.  Now that you have googled BNC to find a  wikipedia 
entry, try googling Navy Connector, and see what you find. A large  number of 
electronic techs came from the U.S. Navy electronics division, and  the Navy 
manuals are used in many civilian electronics schools. So there is  a very 
strong "naval" connection to electronics, and especially  radios.  :-) 

Bill Bina
PS.  Backronym? Please find THAT in a legitimate dictionary! =-O 




On 6/25/2013 11:50 PM,  Marek Dziedzic wrote:

Bill, 
You  wish everything is related to sailing (don’t you?). The BNC stands for 
 Bayonet  Neill–Concelman  connector after  two  guys who invented it (from 
Bell Labs and Amphenol). The  “naval  connector” (British or Bayonet) is a 
backronym. The BNC  connectors  are widely used outside of marine 
applications and their use on boats  (sail or otherwise) is secondary. 
Marek  (in Ottawa). 



_______________________________________________
This List is provided by the C&C Photo Album
_http://www.cncphotoalbum.com_ (http://www.cncphotoalbum.com/) 
_CnC-List@cnc-list.com_ (mailto:CnC-List@cnc-list.com) 




_______________________________________________
This  List is provided by the C&C Photo Album
_http://www.cncphotoalbum.com_ (http://www.cncphotoalbum.com/) 
_CnC-List@cnc-list.com_ (mailto:CnC-List@cnc-list.com) 




_______________________________________________
This  List is provided by the C&C Photo  Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to