Chuck, The list can't handle photos. We all use different methods to store photos on-line and email links. Feel free to send the photo to me off-list. Photos of my boat are at facebook.com/TheOffice35. You can see the limber hole and bulkhead in one or two. It sounds like we have the same issue.
Joel 35/3 The Office Annapolis On Tue, Apr 2, 2013 at 1:59 PM, Chuck Saur <cs...@cenmi.org> wrote: > Thanks, Jake and Joel...I have tried to attach a jpeg view of the > head-ache we apparently all share. The message was kicked back so I guess I > am out of compliance by sending a pic... > > I have read several list-ers reference Rob Ball, and a connection to this > list somewhere. Has he been asked his opinion about any creative solution > to this? Or was this not a design issue, but an 'on the manufacturing > floor' issue? If you say the limber holes solution was doable...I may give > that a try. Unfortunately for my garage storage capacity, a Harbor Freight > is way too close to me here. > Looking at the pic I tried to send, do you guys have the same > situation/position of the egg-crate voids relative to the bulkhead/mast; > where they are just peeking out from under the bulkhead, barely > accessible? Or have you found them different locations for boats of > different years/build locations? > Thanks...and Jake, we have a cabin on St Martins Point, and our family > has enjoyed the Straits of Mackinac for years. St Ignace, (and the new > Mackinac Grille deck overlooking the marina) says hello! Do you get back > often? > > Chuck > C$C 35-3 > Morning Sky > > -- > ** > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
