John,
Instead of rebuilding the head, investigate replacing the entire pump assembly
and the joker valve. If the bowl is in good shape and you can find the correct
pump assembly, this might be a very viable option.
If you choose to replace the head, I suspect stainless hex head lag screws will
be your best option for bolting it down. Most heads are simply screwed down.
If indeed it is a bolt and nut underneath configuration, then look at "toggler"
snaptoggles. http://www.fastenal.com/web/products/detail.ex?sku=50845
Dennis C.
Touche' 35-1 #83
Mandeville LA
>________________________________
> From: John Russo <johnrussob...@optonline.net>
>To: cnc-list@cnc-list.com
>Sent: Saturday, March 16, 2013 2:52 PM
>Subject: Stus-List Head replacement on C&C 32
>
>
>I am planning on replacing the original toilet on my 1984 C&C32 with a Jabsco
>compact model # 29030-3000. The original toilet is a Wilcox Crittenden and I
>have rebuilt the pump once without very good success. Overall Dimensions of
>the two toilets are nearly identical but mounting holes appear different. I
>have contacted Jabsco re mounting dimensions of the existing toilet for info
>without success and looked on line without results. Has anyone done this
>replacement? If I need new mounting holes how do I get a bolt under the boats
>toilet fiberglass platform and hold it to tighten a nut on the toilet base for
>mounting ? Any experience or suggestions?
>
>John
>Arpeggio
>1984 C&C 32
>Norwalk CT
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
