Maybe I'm envisioning the job a bit differently. I suspect the the
construction of most of the older C&C's is as follows. The rub rail has a
flange on the upper edge. I envision the flange of the rub rail sandwiched
between the deck and hull flange. The toe rail sits on top of the deck. I
was thinking one would simply cut the existing rub rail flange where it passes
between the deck and hull flange leaving the flange in place. The rest of the
rub rail would then fall off leaving the toe rail/deck/rub rail flange/hull
joint untouched. You would then apply a strip of butyl tape just below the
joint line, install the new rub rail track and install the new rub rail as per
the video.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>________________________________
> From: Robert Abbott <robertabb...@eastlink.ca>
>To: cnc-list@cnc-list.com
>Cc: dwight veinot <dwightvei...@hfx.eastlink.ca>; 'Dennis C.'
><capt...@yahoo.com>
>Sent: Monday, March 4, 2013 2:12 PM
>Subject: Re: Stus-List Easy rub rail replacement?
>
>
>Just what I was thinking Dwight.....from the video, the work doesn't come from
>installing the new rub rail, you have to get the old one off....not a job I
>would want to tackle casually on our boats.
>
>Bob Abbott
>AZURA
>C&C 32 - 84
>Halifax, N.S.
>
>On 2013/03/04 3:58 PM, dwight veinot wrote:
>
>
>>Is it not an integral part of the deck to hull seal on our C&C’s, so a good
>>job would involve removing the toe rail
>>
>>Dwight Veinot
>>C&C 35 MKII, Alianna
>>Head of St. Margaret's Bay, NS
>>
>>
>>________________________________
>>
>>From:CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C.
>>Sent: March 4, 2013 3:49 PM
>>To: Cn Clist
>>Subject: Stus-List Easy rub rail replacement?
>>
>>Most of us have rub rails with dings, discoloration etc. Every now and them
>>someone posts about rub rail replacement.
>>
>>I've installed rub rail on powerboats and it isn't fun. Especially if you're
>>going around a small radius.
>>
>>Just browsing my new Jamestown Distributor catalog and saw the Tessilmare rub
>>rail kit. Found this short video on the installation.
>>
>><http://www.youtube.com/watch?v=NChfcN3k5Ug>
>>
>>Would this work on our C&C's? Fortunately, Touche's rub rail, while
>>cosmetically not perfect, is still serviceable. However, if replacement is
>>as easy as cutting and removing the old rail and installing new as per the
>>video, I might consider it.
>>
>>No affiliation or testament here.
>>
>>Dennis C.
>>Touche' 35-1 #83
>>Mandeville, LA
>>
>>
>>________________________________
>>
>>No virus found in this message.
>>Checked by AVG - www.avg.com
>>Version: 2012.0.2238 / Virus Database: 2641/5647 -
Release Date: 03/04/13
>>
>>
>>_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com CnC-List@cnc-list.com
>
>
>_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
