Rick, The cutouts in my cabin house are currently 24"x6". I'm planning to use the Lewmar standard portlight size 4. It requires a cutout of 24 11/16" x 6 3/4" so I'll have to do a little trimming on the cabin house to fit them. The corner radius is looks to be very similar, so I don't anticipate any problems. Defender sells them for $325 each. I wouldn't think that your boat would have different ports, but I guess it is possible. James Delaney C&C 38 MKII Oriental, NC
----- Original Message ----- From: Rick Brass To: cnc-list@cnc-list.com Sent: Saturday, February 09, 2013 11:44 AM Subject: Re: Stus-List Old style aluminum frame portlight gasket Opening ports are on the wish list for my 38, but I plan to replace the two forward portlights. I've not found any that are 27 x 7 to fit the openings. What are you using, and how much will the ports cost? Rick Brass Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jtsails Sent: Saturday, February 09, 2013 11:21 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Old style aluminum frame portlight gasket My glass shop didn't want to mess with the spline and gasket, so he glued the plexi in with the same polyurethane that they use on car windshields. Looks pretty good, very similar to the original grey and he only charged me $20 per window, plexi included. I'm going to do the forward two window this way and replace the aft two windows with opening Lewmar portlights. James Delaney C&C 38 MKII Oriental, NC ------------------------------------------------------------------------------ _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
