Do they make an EasyOut screw extractor that big? Or an inside pipe wrench that small?
Joel Aronson On Dec 2, 2012, at 10:14 PM, Eric Frank <efran...@mac.com> wrote: > A 3/4 inch plastic barbed hose adaptor is screwed into the brass thru hull > gate valve for the water inlet to the head. I want to replace the hose barb > with another one, but can't unscrew it from the thru hull valve. Teflon tape > shows on the plastic threads of the barb so I expected it would be an easy > job to unscrew it, but so far I can't move it. Tried a heat gun on low heat > but didn't help. Any ideas what to try? - obviously I don't want to break > the plastic fitting and end up with the threaded portion stuck in the gate > valve. > > Eric > Cat's Paw, 35-2 > Mattapoisett, MA > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
