LkL Several weeks ago I posted regarding trying to lift a leaking deck hatch that would not budge. 5200 was mentioned as the probable culprit. Started by using a dacron fishing line and brush cleaner as a solvent on a corner to break the bond. Then took a very thin 1 inch wide putty knife after dipping into the brush cleaner was able to work under and around all the edges. Took about an hour and a half for this 8 x 12 hatch but saved the gel coat. Hope this might help others facing the same challenge. BTW have since learned there is a product called Anti-Bond that specifically refers to using with 5200.
Lloyd Lippe Finesse LF 39
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
