Thanks Ram for the info. I had gone through this doc to figure out the issue
Figured out this issue is specific to NS VPX(10 version) issue. Issue is fixed now by killing the sessions in the VPX. This doc explains the issue and solution http://support.citrix.com/article/CTX135228 Thanks Rajesh Battala -----Original Message----- From: Ram Ganesh [mailto:ram.gan...@citrix.com] Sent: Tuesday, January 15, 2013 9:50 PM To: cloudstack-dev@incubator.apache.org Subject: RE: Unable to configure resource (NetScaler device) Sorry. I hit <enter> too fast. The exception "connection to CFE exceeded" is seen whenever there are too many tcp connections open to NetScaler management plane. Just check if you are using a stable build. If you come across this issue over a stable build of NetScaler with only CS managing the NetScaler then check if we(CS-NetScalerResource) are closing connections to NetScaler properly. Thanks, RamG > -----Original Message----- > From: Ram Ganesh > Sent: 15 January 2013 21:32 > To: cloudstack-dev@incubator.apache.org > Subject: RE: Unable to configure resource (NetScaler device) > > Rajesh, > > Try rebooting the NetScaler. That should solve the issue > > Thanks, > RamG > > > > -----Original Message----- > > From: Rajesh Battala [mailto:rajesh.batt...@citrix.com] > > Sent: 15 January 2013 20:33 > > To: cloudstack-dev@incubator.apache.org > > Subject: Unable to configure resource (NetScaler device) > > > > Hi All, > > > > I was able to add the NS vpx but got an issue with the below > > messages > > > > INFO [agent.manager.AgentManagerImpl] (ClusteredAgentManager > > Timer:) Could not to find a Discoverer to load the resource: 6 for > > hypervisor > > type: null > > WARN [agent.manager.AgentManagerImpl] (ClusteredAgentManager > > Timer:) Unable to configure resource due to Failed to log in to > > Netscaler device at IP of NS VPX due to Connection limit to CFE > > exceeded > > > > I would like to know what is connection to CFE exceeded? > > > > Thanks > > Rajesh Battala
