I'd be willing to give it a shot if someone could point me in the right direction and be available to answer questions.
On Wed, Aug 29, 2012 at 10:39 AM, Edison Su <edison...@citrix.com> wrote: > Yah, KVM doesn't support VPC yet. Will you help to add VPC support on KVM?:) > Just implement a few VPC related commands... > >> -----Original Message----- >> From: Marcus Sorensen [mailto:shadow...@gmail.com] >> Sent: Wednesday, August 29, 2012 6:49 AM >> To: cloudstack-dev@incubator.apache.org >> Subject: Re: VM router spawning multiple public nics >> >> I can confirm that the patch has fixed my particular issue. >> >> This is likely unrelated and I think it doesn't even use the same >> code, but I began to play with the VPC stuff a bit and noticed that I >> don't get any interfaces except for link local. I'd probably chalk >> that up to it not being ready for KVM, but I thought it was worth a >> mention. I'd be happy to try to help get it ready if someone has time >> to nudge me in the right direction. >> >> On Tue, Aug 28, 2012 at 3:15 PM, Edison Su <edison...@citrix.com> wrote: >> > >> > >> >> -----Original Message----- >> >> From: Marcus Sorensen [mailto:shadow...@gmail.com] >> >> Sent: Tuesday, August 28, 2012 2:00 PM >> >> To: cloudstack-dev@incubator.apache.org >> >> Subject: Re: VM router spawning multiple public nics >> >> >> >> I thought about this solution myself, but below this portion of >> code >> >> it looks like it uses the hash map to determine which nic number to >> >> add the IP to, so with multiple 'untagged' networks it would have no >> >> way of knowing which nicnum in the router corresponds with the >> correct >> >> untagged vlan. >> >> >> >> nicNum = vlanAllocatedToVM.get(ip.getVlanId()); >> >> networkUsage(routerIp, "addVif", "eth" + nicNum); >> >> result = >> >> _virtRouterResource.assignPublicIpAddress(routerName, >> >> routerIp, ip.getPublicIp(), ip.isAdd(), >> >> ip.isFirstIP(), >> >> ip.isSourceNat(), ip.getVlanId(), >> >> ip.getVlanGateway(), >> >> ip.getVlanNetmask(), ip.getVifMacAddress(), >> >> ip.getGuestIp(), nicNum); >> >> >> >> if ip.getVlanId() returns untagged (as it does on networks with no >> >> vlan id), and we tried to put multiple untagged keys in >> >> vlanAllocatedToVM (as with multiple untagged networks), we get the >> >> wrong nicNum, no? >> > >> > In the ipassoc case, if there are multiple untagged networks, all of >> them are use the same >> > Public bridge. Then multiple ip address will be added on eth2 inside >> router VM. >> > If it works physically, then it works. >> > >> >> >> >> On Tue, Aug 28, 2012 at 2:48 PM, Edison Su <edison...@citrix.com> >> wrote: >> >> > >> >> > >> >> >> -----Original Message----- >> >> >> From: Marcus Sorensen [mailto:shadow...@gmail.com] >> >> >> Sent: Tuesday, August 28, 2012 1:40 PM >> >> >> To: cloudstack-dev@incubator.apache.org >> >> >> Subject: Re: VM router spawning multiple public nics >> >> >> >> >> >> Yes, that looks like it would work for me, however that's not >> >> >> something that would ever make it into master, right? Essentially >> >> >> killing tagging for the public, private, and guest traffic labels? >> >> >> There's also still the issue of not being able to differentiate >> >> >> between multiple untagged networks, if we wanted to add an IP to >> a >> >> >> router it might not know which untagged interface to apply it to. >> >> > >> >> > Physically, all the "untagged" network will be created on >> >> public/guest/private bridge(the name we put in >> >> private/public/guest.bridge.name in agent.properties"). >> >> > Because, there is no way to create a new untagged bridge by agent >> >> itself. Agent code only knows how to create a new tagged(vlan) >> bridge. >> >> > So the fix should be pushed into master. >> >> > >> >> >> >> >> >> On Tue, Aug 28, 2012 at 2:32 PM, Edison Su <edison...@citrix.com> >> >> wrote: >> >> >> > >> >> >> > >> >> >> >> -----Original Message----- >> >> >> >> From: Marcus Sorensen [mailto:shadow...@gmail.com] >> >> >> >> Sent: Tuesday, August 28, 2012 12:23 PM >> >> >> >> To: cloudstack-dev@incubator.apache.org >> >> >> >> Subject: Re: VM router spawning multiple public nics >> >> >> >> >> >> >> >> Thanks for pointing me in the right direction. I've reviewed >> this >> >> >> code >> >> >> >> in a bit more detail, and it seems like it's accomplishing the >> >> >> >> following: >> >> >> >> >> >> >> >> 1. get all network interfaces currently connected to the >> running >> >> VM >> >> >> >> (a.k.a vnet devices via libvirt) >> >> >> >> 2. find out which vlans these network interfaces are bridged >> to, >> >> >> store >> >> >> >> this in a hash map of vlan ids and nics >> >> >> >> 3. get all ip addresses to be added to the VM >> >> >> >> 4. for each ip, get the configured vlan id for the ip, compare >> it >> >> to >> >> >> >> the hash map of existing vlan ids and nics >> >> >> >> 5. if the required vlan id is not found in the hash map, >> create a >> >> >> new >> >> >> >> nic >> >> >> >> 6. assign the ip to the nic identified by the vlan id key in >> the >> >> >> hash >> >> >> >> map >> >> >> >> >> >> >> >> In this case, we're getting a vlan id returned in step 2 for a >> >> >> bridged >> >> >> >> nic whose network is defined as untagged in the cloudstack db, >> >> >> >> therefore in step 5 we never match as already having a nic for >> >> >> >> 'untagged'. I wrote a big long response discussing this issue, >> >> but >> >> >> as >> >> >> >> I began to dig further I realized that aside from my >> particular >> >> case, >> >> >> >> untagged vlans in general are just broken (for example they >> can't >> >> be >> >> >> >> dealt with uniquely in the current IpAssocCommand code, given >> the >> >> >> hash >> >> >> >> map) and it would require more effort than I have time for now >> to >> >> >> make >> >> >> >> things work. If the code were already in place to >> differentiate >> >> >> >> between multiple untagged nics I think that fixing my problem >> >> would >> >> >> be >> >> >> >> trivial, but since its not, I'll just find an alternative >> >> solution. >> >> >> >> >> >> >> > >> >> >> > The untagged network usually means "untagged", no vlan on the >> >> >> bridge... >> >> >> > In your case, the untagged network actually has vlan(tagged) on >> >> the >> >> >> bridge, thus getting things confused. >> >> >> > Will this patch(http://pastebin.com/HJXzZwKp) work for you? >> >> >> > >> >> >> >> On Mon, Aug 27, 2012 at 10:46 PM, Marcus Sorensen >> >> >> <shadow...@gmail.com> >> >> >> >> wrote: >> >> >> >> > ... >> >> >> >> > Integer nicPos = 0; >> >> >> >> > for (InterfaceDef nic : nics) { >> >> >> >> > if >> >> >> >> (nic.getBrName().equalsIgnoreCase(_linkLocalBridgeName)) { >> >> >> >> > vlanAllocatedToVM.put("LinkLocal", >> nicPos); >> >> >> >> > } else { >> >> >> >> > String vlanId = >> >> >> >> getVlanIdFromBridge(nic.getBrName()); >> >> >> >> > if (vlanId != null) { >> >> >> >> > vlanAllocatedToVM.put(vlanId, >> nicPos); >> >> >> >> > } else { >> >> >> >> > vlanAllocatedToVM.put(Vlan.UNTAGGED, >> >> >> nicPos); >> >> >> >> > } >> >> >> >> > } >> >> >> >> > nicPos++; >> >> >> >> > } >> >> >> >> > IpAddressTO[] ips = cmd.getIpAddresses(); >> >> >> >> > int i = 0; >> >> >> >> > String result = null; >> >> >> >> > int nicNum = 0; >> >> >> >> > for (IpAddressTO ip : ips) { >> >> >> >> > if >> >> (!vlanAllocatedToVM.containsKey(ip.getVlanId())) >> >> >> { >> >> >> >> > /* plug a vif into router */ >> >> >> >> > VifHotPlug(conn, routerName, >> ip.getVlanId(), >> >> >> >> > ip.getVifMacAddress()); >> >> >> >> > vlanAllocatedToVM.put(ip.getVlanId(), >> >> >> nicPos++); >> >> >> >> > } >> >> >> >> > ... >> >> >> >> > >> >> >> >> > Looks like the getVlanIdFromBridge might be a bit misleading. >> I >> >> am >> >> >> >> > running my guest public traffic on a 'cloudbr470', which is >> a >> >> >> bridge >> >> >> >> > to eth2.470, yet I configured this network as 'untagged' >> >> because I >> >> >> >> > have a vlan 470 available on eth3 for cloudstack to >> autoassign >> >> >> (eth3 >> >> >> >> > is where all of my stuff will be autoassigned). So I'm not >> 100% >> >> >> sure >> >> >> >> > yet what's going on here but it seems as though the above is >> >> not >> >> >> >> > setting any 'Vlan.UNTAGGED', since it finds a vlan number >> for >> >> >> >> > eth2.470, but when it enumerates the IPs for the router, it >> >> then >> >> >> runs >> >> >> >> > ip.getVlanId() and doesn't find a nic for the untagged IP >> and >> >> >> creates >> >> >> >> > one. >> >> >> >> > >> >> >> >> > >> >> >> >> > I realize this is perhaps an uncommon case, but a bug >> >> nonetheless. >> >> >> >> > I'll play with the code a bit and see if I can come up with >> a >> >> >> >> > solution. I'm thinking I can look at the nic's broadcast URI >> >> and >> >> >> see >> >> >> >> > if it's supposed to be untagged, then add to >> vlanAllocatedToVM >> >> >> >> > appropriately, off the top of my head something like: >> >> >> >> > >> >> >> >> > String vlanId = >> >> >> >> getVlanIdFromBridge(nic.getBrName()); >> >> >> >> > if (vlanId != null && >> >> >> >> > !nic.getBroadcastUri().toString().contains("untagged") { >> >> >> >> > vlanAllocatedToVM.put(vlanId, >> nicPos); >> >> >> >> > } else { >> >> >> >> > vlanAllocatedToVM.put(Vlan.UNTAGGED, >> >> >> nicPos); >> >> >> >> > } >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> > On Mon, Aug 27, 2012 at 6:42 PM, Edison Su >> >> <edison...@citrix.com> >> >> >> >> wrote: >> >> >> >> >> Possible bug in in kvm code: LibvirtComputingResource- >> >> >> >> >execute(IpAssocCommand cmd)-> VifHotPlug, which is only place >> >> >> adding >> >> >> >> nic into router vm. >> >> >> >> >> Turn on agent log, then take a look what happened. >> >> >> >> >> >> >> >> >> >>> -----Original Message----- >> >> >> >> >>> From: Marcus Sorensen [mailto:shadow...@gmail.com] >> >> >> >> >>> Sent: Monday, August 27, 2012 5:10 PM >> >> >> >> >>> To: cloudstack-dev@incubator.apache.org >> >> >> >> >>> Subject: VM router spawning multiple public nics >> >> >> >> >>> >> >> >> >> >>> I've got two zones running the same build of cloudstack (a >> >> >> recent >> >> >> >> copy >> >> >> >> >>> of master). One of them creates routers that turn into >> ugly >> >> >> >> >>> multi-headed beasts, and by that I mean that any time I >> >> create a >> >> >> >> port >> >> >> >> >>> forwarding or iptables rule for that router I get a new >> >> public >> >> >> NIC >> >> >> >> >>> with an identical IP address, I have an instance with a >> few >> >> tens >> >> >> of >> >> >> >> >>> NICs. My guess is that some script isn't detecting that >> >> there's >> >> >> >> >>> already a NIC with the public IP on it. It looks fine in >> the >> >> >> >> >>> database, there is only one public NIC defined in the nics >> >> table. >> >> >> >> >>> I'll troubleshoot it tomorrow, but if anyone knows where I >> >> >> should >> >> >> >> >>> begin the headstart would be appreciated. >> >> >> >> >>> >> >> >> >> >>> Thanks
