On Tue, Jan 26, 2010 at 5:19 PM, Rob Jennings <rjenni...@cape.k12.de.us> wrote: > I work for a school district and our new xserves have just been updated to > the 10.6 server operating system. The problem I am experiencing on all 4 of > these servers which are in different schools is the same. The log files are > filling up: > 1/21/10 4:39:43 PMorg.clamav.freshclam[56]Can't connect to port 80 of host > database.clamav.net (IP: 130.59.10.36) > 1/21/10 4:39:43 PMorg.clamav.freshclam[56]Trying host database.clamav.net > (193.1.193.64)... > 1/21/10 4:40:13 PMorg.clamav.freshclam[56]nonblock_connect: connect timing > out (30 secs)
Something about your network security or routing is preventing outbound port 80 traffic from your mail servers to the db servers, which is what it needs to download the new signatures. If you cannot telnet from the mail servers to the above IPs on port 80 (there are lots more), then you should check the local firewall on the servers, and any firewalls/routers it is crossing to get to the outside world. > [56]WARNING: Your ClamAV installation is OUTDATED!1/21/10 4:41:24 > [56]WARNING: Local version: 0.95.2 Recommended version: 0.95.3 1/21/10 4:41:24 > [56]DON'T PANIC! Read http://www.clamav.net/support/faq That message says that you're running a little bit older version than what is current. Look around to see if there is updated clam packages available for your OS. I do not think this is related to your inability to update though. -- Regards... Todd Real Integrity is doing the right thing, knowing that no body's going to know whether you did it or not. _______________________________________________ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
