Usually "Version:" states the program version (i.e.: 0.93.3) and "Release:" stands for the "modification level" (patches) you applied to the standard package...
Bye G Jim Preston wrote: > Spiro Harvey, Knossos Networks Ltd wrote: >>> Revert to 0.93.1 until the current 0.93.3 is available to you. >> or even better, build an RPM from source. >> >> here's how I do it: >> >> attached is a file called clamav.spec. save that into >> /usr/src/redhat/SPECS/ >> >> then put clamav-0.93.3.tar.gz into /usr/src/redhat/SOURCES/ >> >> >> build the rpms: >> >> # rpmbuild -ba /usr/src/redhat/SPECS/clamav.spec >> >> the created RPMs will be in /usr/src/redhat/RPMS/ >> > I normally build from source but wanted to try the rpm solution using > your clamav.spec. I am running FC6. > I created the clamav.spec file and saved to /usr/src/redhat/SPECS/ > When I run rpmbuild -ba /usr/src/redhat/SPECS/clamav.spec > All goes well until an error in %prep: > ................ > + STATUS=0 > + '[' 0 -ne 0 ']' > + cd clamav-0.93 > /var/tmp/rpm-tmp.60152: line 33: cd: clamav-0.93: No such file or directory > error: Bad exit status from /var/tmp/rpm-tmp.60152 (%prep) > > > RPM build errors: > Bad exit status from /var/tmp/rpm-tmp.60152 (%prep) > > It correctly unzips the clamav-0.93.3.tar.gz AND creates a clamav-0.93.3 > directory BUT tries to go to clamav-0.93 instead of clamav-0.93.3. Any > suggestions? > > Thanks, Jim > _______________________________________________ > Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net > http://www.clamav.net/support/ml > _______________________________________________ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
