René Berber writes: > > ./configure --prefix=/export/home/clamav --enable-milter > > So it has libcurl which brings openssl... some problem reports had this, > could > you try a recompile w/o curl?
i can. i tried a build with ./configure --prefix=/export/home/clamav --enable-milter --without-libcurl with ScanArchive yes in clamd.conf, it starts and seems to be scanning okay. CPU usage seems a lot 'spikier' than 0.88.7 with peaks at 80% or more of the (4 CPU) system. when the CPU peaks, there always seems to be a logged message on the console: ERROR: No data received from clamd in 120 seconds clamfi_eom: read nothing from clamd on sennit at which point the CPU falls back. the memory footprint of clamd also seems to increase: after about an hour (wall clock) top claims it's 95-100MB. CPU usage at the same time is 81 minutes -- about 1/3 of the total available. kinda sorta. at the two hour point, the system load is about 16 and the CPU is 90%+ and staying there. there is certainly an _improvement_ by adding '--without-libcurl'. but it's not a miracule cure. :-) rp _______________________________________________ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
