> To add to this thread. > > It seems to hang on quite a few (not all) Session TimeOuts and ALL > 'WARNING: ScanStream: Size exceeded' events
I have same problem. I have low traffic and this situation come when too e-mails is coming at the same time. BTW isn't it problem on SMP machines? I have RH 7.2, sendmail 8.11.6-25.72, clamav 0.60 and clamav-milter 0.55. Luf > At 02:57 PM 7/10/03 -0600, you wrote: > >Hey all! > > > >Maybe someone here can help out with a curious problem. Its happening on > >at least 2 servers running RedHat 7.2 and 7.3 with patched Kernels... etc > >etc > > > >They are both running: > >Sendmail-8.12.9 > >OpenWebmail > >SASL for user auth > >And both have the latest and greatest Clamd and Clamav-Milter > > > >What seems to happen, over time, we get log entries like: > >Session 0 stopped due to timeout > >Session 1 stopped due to timeout > > > >And then in some cases, clamd will have a [defunct] thread in the ps list, > >and after short period - the clamav-milter plugin reports: > >Milter (clmilter): timeout before data read > >Milter (clmilter): to error state > > > ><NEXT PASS> > >Milter (clmilter): timeout before data read > >Milter (clmilter): to error state > >Milter (clmilter): init failed to open > >Milter (clmilter): to error state > > > >And at that point - it stops working. Clamd needs to be shutdown and > >restarted, Clamav-Milter also - and Sendmail. Obviously not a good > >situation. > >This is on 2 separate servers, both have timeout values at 360 (played > >with these - no difference) > >The sendmail.cf milter lines are set at 6 minutes each (6m) > > > >Any ideas?? Happens randomly - one server has a lot of traffic and the > >other minimal, happens on both. > >Both work fine and trap viruses when they are working. > > > >Jerome > >ePaxsys, Inc. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
