Hi all.
I have a simple inbound route-map on a VPNv4 PE-CE BGP session that does
the below:
route-map TEST deny 10
match rpki invalid
!
route-map TEST permit 20
match ip address prefix-list test-in
set metric 0
set local-preference 120
set extcommunity rt 65200:5
!
route-map TEST deny 65535
The outcome of that policy works correctly for setting MED to 0 and
LOCAL_PREF to 120.
However, I can't get it to set the extended RT community value to
65200:5. Nothing happens.
If I update that sequence with the below...
route-map TEST permit 20
match ip address prefix-list test-in
set metric 0
set local-preference 120
set community 65200:5
set extcommunity rt 65200:5
... the regular community value is applied to the route. Of course, this
does not work for me since I need the extended RT community applied to
the route for it work further down the core.
Am I doing something wrong, or is this a bug?
System is an ASR1002-X running IOS XE 17.03.04a.
For completeness, doing this on Junos works flawlessly.
All help appreciated. Thanks.
Mark.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
