Mark, thanks. We were quoted a MX304 for the Internet edge from Juniper. How
has your experience been with it? are you 10G upstream and downstream? Any
IPS on the 10G connection?
We tried an NCS-5501 and it was a disaster, in a word. The 10G interface,
uRPF, source-based blackholing, and routing table depth with Cisco is a
limiting factor in their product line.
-e-
Eric Louie
619-743-5375 Cell/text
Stay in this moment, it's the only one you really have
Take the time to be compassionate today
On Wednesday, February 22, 2023 at 08:36:31 AM PST, Mark Tinka via
cisco-nsp <cisco-nsp@puck.nether.net> wrote:
On 2/22/23 05:31, Eric Louie via cisco-nsp wrote:
> Hi folks
> Recommendations and your experiences with an Internet border router for a 10G
> Internet connection, with DDoS service and unicast reverse path forwarding.
> Brand and model requested, if you have it, and bad experiences are ok, too.
Likely to be blasphemous, but we are focusing on the Juniper MX204 for
this type of function, going forward.
On the Cisco side, I think the ASR9902 might be the closest
competitor... but unless things have "improved", Cisco's latest
licensing structure is rather bitter.
Mark.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
