--- Begin Message ---
Hello people,
I searched several IOS XR routing policy language documentations and also opened a TAC
case but still searching an answer to the question: Is it possible to match on a
neighbor's IP address or ASN inside a condition?
So for example if I have a route-policy on a neighbor-group and would like to announce a
specific prefix only to one of these neighbors, I would like to be able to do something like:
if (neighbor-asn '12731') then
# Announce this one prefix only, if receiving neighbor is in ASN 12731
done
elseif (neighbor-ip '192.168.1.1') then
# Announce this one prefix only, if receiving neighbor is 192.168.1.1
done
endif
So I would expect the RPL to process a prefix from my BGP table and match against the
neighbor that the update should be generated for.
Am I expressing myself clearly? I hope so :) And it seems that "as-path neighbor-is" is
NOT the way to go.
Thank you!
Sascha
--- End Message ---
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
