Hi, On Thursday, 12 November 2020, Gert Doering <[email protected]> wrote:
> Hi, > > On Thu, Nov 12, 2020 at 10:06:11AM -0600, N. Max Pierson wrote: > > We're trying to figure out what the last train of XR software that can > run > > on the RSP440 for a 9006. We're running 6.2 right now but I can't seem to > > find any docs that state what the last version of support is. We're > trying > > to patch/upgrade a few 9006's from CSCvv09115 > > <https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv09115> but aren't > sure > > if 6.7.2 will run on our RSPs. We're getting rid of these in a few months > > but didn't want to be exposed in the interrium if possible. > > 6.5.3 works and has a SMU for that bug. > > It is officially not supported, as in "we do not even try to see if it > boots", but for us, it works ok (so far). Careful on the 9901 (64bit): with this SMU on 6.5.3 you end up with just loopbacks, mgmt and bundle-ether interfaces as the actual interfaces are not recognized anymore. Happened on 2 different boxes here. Rollback is needed. The 32-bit SMU was released back in august, there was sufficient time to get this right. Instead the 64-bit SMU fix was just released yesterday, so it looks like they had to rush that one. Trivia nr 2: There is no SMU yet for the recommended releases like 7.0.2 and 6.6.3. fun! --lukas _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
