CPP is the other issue. ex control-plane management-plane inband interface hundred-gige0/1/1 allow SSH allow blah
On Wed, Sep 23, 2020 at 12:51 PM Ted Pelas Johansson <[email protected]> wrote: > Regarding isis, it looks like you have MTU mismatch since you configured > 1600 byte on both platforms. > > IOS/XE doesn't count the Ethernet header (1600) while XR/JunOS does (1614). > > You also need to add the interface under `mpls ldp`. > > Sent from my Phone > > > On 23 Sep 2020, at 17:25, Olivier CALVANO <[email protected]> wrote: > > > > Hello, > > > > I am asking you for a little help, I just got an ASR9001 router and I am > a > > little confused with the IOS XR completely different from my ASR1001. > > > > 1- First problem, ISIS seems not to work > > > > on my ASR1001X I have: > > interface TenGigabitEthernet7/1 > > mtu 1600 > > ip address 192.168.1.1 255.255.255.252 > > ip router isis > > mpls label protocol ldp > > mpls ip > > > > router isis > > net 49.0001.0000.0000.0450.00 > > is-type level-2-only > > metric-style wide > > redistribute connected > > ! > > address-family ipv6 > > multi-topology > > redistribute connected > > redistribute static > > exit-address-family > > > > connected on this port, I have the ASR9001 with in conf: > > > > interface TenGigE0/0/2/0 > > mtu 1600 > > ipv4 address 192.168.1.2 255.255.255.252 > > > > router isis WanCmp > > is-type level-2-only > > net 49.0001.0000.0000.0452.00 > > address-family ipv6 unicast > > ! > > interface TenGigE0/0/2/0 > > address-family ipv4 unicast > > ! > > ! > > ! > > > > > > but when i put sh isis topo > > Wed Sep 23 07:45:50.378 UTC > > > > IS-IS phibee paths to IPv4 Unicast (Level-2) routers > > System Id Metric Next-Hop Interface SNPA > > ASR9001 -- > > > > Anyone have a idea of the problems ? > > > > > > 2- SSH/Telnet access to the router > > > > currently I have to connect the ASR9001 router via the MgmtEth0 / RSP0 / > > CPU0 / 0 port to access it. > > > > Unable to go through the wan classic TenGigE0 / 0/2/0 interface > > > > in my configuration, i have: > > > > telnet vrf default ipv4 server max-servers 10 > > > > line console > > exec-timeout 1440 0 > > escape-character 0x5a > > session-limit 10 > > disconnect-character 0x59 > > session-timeout 100 > > transport input telnet ssh > > transport output telnet ssh > > transport preferred none > > ! > > line default > > exec-timeout 1440 0 > > access-class ingress admin-nets > > transport input all > > transport output telnet ssh > > transport preferred none > > > > vty-pool default 0 5 line-template default > > control-plane > > management-plane > > out-of-band > > interface TenGigE0/0/2/0 > > allow SSH peer > > address ipv4 192.168.0.0/21 > > ! > > allow Telnet peer > > address ipv4 192.168.0.0/21 > > ! > > > > > > ssh server v2 > > ssh server vrf default > > ssh server vrf Mgmt-intf > > end > > > > > > if i want connect on wan interface, i have all time a connexion refused > > > > > > > > > > > > thanks for your help > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
