There is a little bit of this on NXOS now - just a bit more each release, like tabbing out man-made prefix lists
From: cisco-nsp <[email protected]> On Behalf Of [email protected] Sent: Wednesday, September 2, 2020 5:44 PM To: [email protected] Subject: [c-nsp] cli auto-complete on configured names This message originates from outside of your organisation. RP/0/0/CPU0:r22#sh mpls traffic-eng tunnels name ? r22--->r20 Tunnel name (if contains space, enclose name with " ") r20--->r22 Tunnel name (if contains space, enclose name with " ") r25_t101 Tunnel name (if contains space, enclose name with " ") WORD Tunnel name (if contains space, enclose name with " ") RP/0/0/CPU0:r22#sh mpls traffic-eng tunnels name r22--->r20 Beautiful. Whoever coded this must've spent some time working with Juniper on Junos. I rarely ever see IOS/XE/XR have an auto-complete (tab key) on configured names of items. Thanks! Aaron [email protected]<mailto:[email protected]> _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp<https://protect-eu.mimecast.com/s/FMCeCnZKVCG9p2CNVGZn?domain=puck.nether.net> archive at http://puck.nether.net/pipermail/cisco-nsp/<https://protect-eu.mimecast.com/s/wiEQCoYL9tX2pRu6Bj1Q?domain=puck.nether.net> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
