It depends on which XRv image you use. The “free” image has a very limited forwarding plane - it was really only meant for DevOps work
The licensed XRv9000 images work, I’m told, but as we’re only using them as RRs I haven’t tested this myself Regards, Chris Jones > On 9 May 2020, at 05:13, Aaron Gould <[email protected]> wrote: > > Using csr1000v in EVE-NG, yesterday I was able to do mp2mp vpls (rfc4761 bgp > ad, bgp sig) using (3) csr1000v routers and it all worked, control plane > *and* data plane, all CE's behind the csr1000v pe's could ping each other. > (i test rfc4762 bgp ad, ldp sig, but only with 2 csr1000v and it worked... i > may go back and at in a third csr1000v later). > > > > but, my question and problem was. XRv would not pass traffic in those vpls > tests. control plane would work, configs would commit, and neighbor > pseudowires would even go UP and establish to the other pe's (csr1000v's) > BUT, i got nasty traceback errors on XRv and data plane would not pass > traffic. > > > > Has anyone been successful in getting VPLS to work in XRv ? > > > > What about EVPN in XRv? .does EVPN/MPLS forwarding work in XRv? > > > > > > Tracebacks errors I got on XRv following the commit of the VPLS config.. > > > > RP/0/RP0/CPU0:May 7 22:03:47.917 : fib_mgr[224]: %MGBL-DPC-2-SW_ERR : > Failed to configure l2vpn_ldi (Invalid DPA id 17) : fib_mgr : (PID=4352) : > -Traceback= 7f60faf970ca 7f60fafb5582 7f6105a1a270 7f6105a27740 7f6105a28a70 > 7f61186492f5 7f6118486919 7f6118484064 7f61244fcec8 7f61244fefe9 5ebe3a > 5f9054 5fb5d8 605062 6fe214 538d69 > > > > > > RP/0/RP0/CPU0:May 7 22:03:47.917 : fib_mgr[224]: > %ROUTING-FIB-3-PLATF_UPD_FAIL : FIB platform update failed: > Obj=DATA_TYPE_LOADINFO[ptr=0x114a949f8,refc=0x1,flags=0x80c441] > Action=MODIFY Proto=ipv4. Cerr='dpc_rm_svr' detected the 'warning' condition > 'Internal invalid parameter found.' : fib_mgr : (PID=4352) : -Traceback= > 7f61244fefe9 5ebe3a 5f9054 5fb5d8 605062 6fe214 538d69 565efc 567d65 688000 > 68a9fc 68adf8 43c59a 7f61229daa21 7f61229ebb6e 42376e > > > > > > RP/0/RP0/CPU0:May 7 22:03:47.918 : fib_mgr[224]: %ROUTING-FIB-3-PD_FAIL : > FIB platform error: fib_ldi_platform_update 2077: PD action MODIFY failed > for passed_ldi 0x114a949f8 type DATA_TYPE_LOADINFO flags 0x80c441. Shared > LDI 0x114a949f8 num_slots 1 num_buckets 1 depth 2 ldi type 1 ldi protocol > mpls flags 0x80c441 : 0x4b88b400 'dpc_rm_svr' detected the 'warning' > condition 'Internal invalid parameter found.' : fib_mgr : (PID=4352) : > -Traceback= 5f9054 5fb5d8 605062 6fe214 538d69 565efc 567d65 688000 68a > > 9fc 68adf8 43c59a 7f6122(TRUNCATED) > > > > > > -Aaron > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
