Dear all I'd like to have your recommandation. Our customer runs on ASR1001X an EBGP peering (full routing) with one ISP and some internal IBGP peering (full routing) with other sites of the customer.
ASR1001xxx#sh ip bgp summary BGP router identifier 185.x.xxx, local AS number 12111 BGP table version is 165259260, main routing table version 165259260 791972 network entries using 196409056 bytes of memory 2581993 path entries using 330495104 bytes of memory 458319/118958 BGP path/bestpath attribute entries using 120996216 bytes of memory 233298 BGP AS-PATH entries using 11620238 bytes of memory 84 BGP community entries using 2704 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 659523318 total bytes of memory BGP activity 5705457/4913485 prefixes, 122354684/119772691 paths, scan interval 60 secs Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 80.14.x.1 4 32x 2702998 53942 165259167 0 0 1w4d 791619 185.71.x.1 4 121xx 28908450 37253524 165259260 0 0 31w0d 756795 185.71.x.2 4 121xx 36083442 31272759 165259260 0 0 26w0d 276292 185.71.x.3 4 121xx 28549167 37251270 165259260 0 0 31w0d 757279 We'd like to add a new EBGP peering on the same router (with full routing received from a second carrier) in order to load balance traffic (mainly in output). The question is: do you see any issue in terms of performance/memory/whatelse in adding a new EBGP peering ? Which is the best way to try to load balance in output ? >From output following I am not sure if going to upgrade the RAM or not... Thanks in advance for your help! Cheers James ASR1001xxx#sh ver Cisco IOS XE Software, Version 16.03.07 Cisco IOS Software [Denali], ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.3.7, RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2018 by Cisco Systems, Inc. Compiled Sat 04-Aug-18 00:51 by mcpre Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0. The software code licensed under GPL Version 2.0 is free software that comes with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such GPL code under the terms of GPL Version 2.0. For more details, see the documentation or "License Notice" file accompanying the IOS-XE software, or the applicable URL provided on the flyer accompanying the IOS-XE software. ROM: IOS-XE ROMMON ASR1001xxx uptime is 31 weeks, 47 minutes Uptime for this control processor is 31 weeks, 49 minutes System returned to ROM by reload at 08:25:36 CET Sun Aug 4 2019 System restarted at 08:29:12 CET Sun Aug 4 2019 System image file is "bootflash:asr1001x-universalk9.16.03.07.SPA.bin" Last reload reason: Reload Command This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to [email protected]. License Type: Permanent License Level: ipbase Next reload license Level: ipbase cisco ASR1001-X (1NG) processor (revision 1NG) with 3728595K/6147K bytes of memory. Processor board ID FXSrrrrrr 6 Gigabit Ethernet interfaces 2 Ten Gigabit Ethernet interfaces 32768K bytes of non-volatile configuration memory. 8388608K bytes of physical memory. 6594559K bytes of eUSB flash at bootflash:. 0K bytes of at harddisk:. 0K bytes of at webui:. Configuration register is 0x2102 ASR1001xxx#sh cef fib 792336 allocated IPv4 entries, 0 failed allocations 1 allocated IPv6 entry, 0 failed allocations ASR1001xxx#show platform software status control-processor brief Load Average Slot Status 1-Min 5-Min 15-Min RP0 Healthy 0.19 0.17 0.14 Memory (kB) Slot Status Total Used (Pct) Free (Pct) Committed (Pct) RP0 Healthy 8058752 5470576 (68%) 2588176 (32%) 6986084 (87%) CPU Utilization Slot CPU User System Nice Idle IRQ SIRQ IOwait RP0 0 1.10 2.50 0.00 96.20 0.00 0.20 0.00 1 1.20 0.90 0.00 97.90 0.00 0.00 0.00 2 0.50 0.50 0.00 99.00 0.00 0.00 0.00 3 0.49 0.79 0.00 98.70 0.00 0.00 0.00 4 0.89 1.59 0.00 97.50 0.00 0.00 0.00 5 8.10 0.60 0.00 91.29 0.00 0.00 0.00 6 0.70 0.50 0.00 98.80 0.00 0.00 0.00 7 0.70 1.20 0.00 98.10 0.00 0.00 0.00 ASR1001xxx#sh memory Head Total(b) Used(b) Free(b) Lowest(b) Largest(b) Processor 7FAA04789010 3817942128 1879191444 1938750684 1929980360 1931880324 lsmpi_io 7FA9FF9FF1A8 6295128 6294304 824 824 412 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
