Unsure about ASR9901 running 6.5.2... but I just now upgraded ASR9006 from 4.1.2 to 4.3.4
The process is pretty much... admin install add ... admin install activate ... admin install commit ...that's pretty much it in simplest terms... (I'll say I don't fully understand all the caveats and nuances with bridge smu's, time expiry issue, bug fix smu packages, bundle all pie's into a tar ball, etc,etc)... But in its simplest form, that's it. admin install add disk1:asr9k-mgbl-px.pie-4.3.4 disk1:asr9k-mpls-px.pie-4.3.4 disk1:asr9k-mini-px.pie-4.3.4 disk1:asr9k-fpd-px.pie-4.3.4 synchronous admin install activate disk0:asr9k-mgbl-px-4.3.4 disk0:asr9k-mpls-px-4.3.4 disk0:asr9k-mini-px-4.3.4 disk0:asr9k-fpd-px-4.3.4 synchronous (after reboot occurs) admin install commit You have may other pies you require, just add this into the list above. I had issues with tftp, so I simply ftp the files into disk1 and executed install from that location I had issues with a clock and also fpd, simply set the clock to something like 2009 and add that fpd pie. That's what I did, worked. - Aaron _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
