I have this same issue with this same behavior. A reboot was also
required to get it to detect. The kicker is we have one of these cards
in the chassis working already. TAC told me to RMA the SPA.
We are sending a second SPA-1X10GE-L-V2 that was tested in an ASR1002
(not an X, all we had to test).
#sh ver
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M),
Version 15.2(4)S7, RELEASE SOFTWARE (fc4)
IOS XE Version: 03.07.07.S
#sh plat
Chassis type: ASR1002-X
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1002-X ok 7w1d
0/0 6XGE-BUILT-IN ok 7w1d
0/1 SPA-1X10GE-L-V2 out of service 2w0d
0/2 SPA-1X10GE-L-V2 ok 7w1d
R0 ASR1002-X ok, active 7w1d
F0 ASR1002-X ok, active 7w1d
P0 ASR1002-PWR-AC ok 7w1d
P1 ASR1002-PWR-AC ok 7w1d
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 12042303 15.2(4r)S1
R0 12042303 15.2(4r)S1
F0 12042303 15.2(4r)S1
#sh hw-module subslot all oir
Module Model Operational Status
------------- -------------------- ------------------------
subslot 0/0 6XGE-BUILT-IN ok
subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
subslot 0/2 SPA-1X10GE-L-V2 ok
On 7/25/2019 8:49 AM, Sheremet Roman wrote:
Hi,
We have Cisco ASR1002-X
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M), Version
15.3(2)S1, RELEASE SOFTWARE (fc1)
IOS XE Version: 03.09.01.S
and 10g module SPA-1X10GE-L-V2
So, module wont work, anyone use same? OIR not detect this module
automatically but after reload module not works also...
Please look my details:
Border-ASR1002#sh hw-module subslot all oir
Module Model Operational Status
------------- -------------------- ------------------------
subslot 0/0 6XGE-BUILT-IN ok
subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
subslot 0/2 SPA-8X1GE-V2 ok
Border-ASR1002#sh platform hardware slot 0 spa status
Bay SPA Type State PST POK SOK PENB RST DENB HSS
-------------------------------------------------------------------------------
0 6XGE-BUILT-IN Online 0 1 1 1 1 0 1
1 SPA-1XTENGE-XFP-V2 Offline 0 0 0 0 0 1 0
2 SPA-8X1GE-V2 Online 0 1 1 1 1 0 1
3 Empty Detection 1 0 0 0 0 1 0
Border-ASR1002#sh hw-module all fpd
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
0/0 6XGE-BUILT-IN 1.0 1-2KP HSPA BULLSEY 2.34 2.34
---- ---------------------- ------ ------------------ ----------- --------------
0/1 SPA-1X10... <DISABLED> 1.2 1-10GE I/O FPGA 1.9 1.9
---- ---------------------- ------ ------------------ ----------- --------------
0/2 SPA-8X1GE-V2 1.0 1-GE I/O FPGA 1.10 1.10
==== ====================== ====== =============================================
Border-ASR1002#sh platform
Chassis type: ASR1002-X
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1002-X ok 04:21:49
0/0 6XGE-BUILT-IN ok 04:20:55
0/1 SPA-1X10GE-L-V2 out of service 04:19:44
0/2 SPA-8X1GE-V2 ok 04:20:54
R0 ASR1002-X ok, active 04:21:49
F0 ASR1002-X ok, active 04:21:49
P0 ASR1002-PWR-AC ok 04:21:20
P1 ASR1002-PWR-AC ok 04:21:19
Logs:
Jul 25 08:06:36.160: %SPA_OIR-3-HW_INIT_TIMEOUT: subslot 0/1
Jul 25 08:06:41.160: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
recovery by reloading SPA
Jul 25 08:06:41.161: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in
subslot 0/1
Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: CLEAR CRITICAL SPA subslot 0/1
Failed
Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: ASSERT MAJOR SPA subslot 0/1
Unknown state
Jul 25 08:06:50.518: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1:
SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink
in sync, spa: src not in sync, sink in sync).
Jul 25 08:06:55.518: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
recovery by reloading SPA
Jul 25 08:06:55.519: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in
subslot 0/1
Jul 25 08:07:03.528: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1:
SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink
in sync, spa: src not in sync, sink in sync).
Jul 25 08:07:08.528: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
recovery by reloading SPA
Jul 25 08:07:08.528: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in
subslot 0/1
Jul 25 08:07:16.525: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1:
SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink
in sync, spa: src not in sync, sink in sync).
Jul 25 08:07:21.525: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
recovery by reloading SPA
Jul 25 08:07:21.525: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in
subslot 0/1
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
