Hello, I have a distinct memory of running selective QinQ on a 6500a chassis a couple of years back but there where some ASIC limit on it where the mapping done on one interface would affect all ports in a portgroup belonging to that specific ASIC. Perhaps this feature was removed because of this limitation though?
//Gustav -----Ursprungligt meddelande----- Från: cisco-nsp <[email protected]> För Christophe Fillot Skickat: den 19 februari 2019 09:05 Till: Peter Rathlev <[email protected]>; Tom Hill <[email protected]> Kopia: [email protected] Ämne: Re: [c-nsp] QinQ termination on a Catalyst 6800 On 18/02/2019 23:11, Peter Rathlev wrote: > On Mon, 2019-02-18 at 20:14 +0000, Tom Hill wrote: >> On 14/02/2019 09:01, Christophe Fillot wrote: >>> Anyone knows if this platform supports QinQ termination ? >>> >>> The "encapsulation dot1q X second-dot1q Y" command is not present, >>> but maybe there is another way to do it ? >> EVCs? > I don't think it does double tagging even with EVCs. The following is > from a Sup6T running 15.3, but I think 15.5 is the same. I would love > to hear that it isn't, I don't have a 15.5 box to test right now. Unfortunately, it's the same in 15.5, the only option for rewrite is to push tags, and encapsulation supports only basic 802.1Q... Thanks, Christophe _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
