FWIW, be aware of CSCvm02572 if you’re planning a mass upgrade before April.
'login on-failure log’ or 'login block-for...' causes the box to reboot on a failed ssh login. Currently still broken in 3.18. Fixed 15.6(2)SP6. ASR920 not listed in affected platforms, but it is... > On Jan 26, 2019, at 12:33 PM, Erik Sundberg <[email protected]> wrote: > > I just did a 3.16 to 3.18 upgrade on two devices it was at least 30 mins. > There was a fpga upgrade and additional reboot. So its normal > > Erik Sundberg > Sr. Network Engineer > Nitel > 350 N Orleans Street > Suite 1300N > Chicago, Il 60654 > Desk: 773-661-5532 > Cell: 708-710-7419 > NOC: 866-892-0915 > Email: [email protected] > web: www.nitelusa.com > > ________________________________ > From: cisco-nsp <[email protected]> on behalf of James Jun > <[email protected]> > Sent: Saturday, January 26, 2019 8:57 AM > To: Noah > Cc: [email protected] > Subject: Re: [c-nsp] ASR920 Software Upgrade 2019 > >> >> We found that to be quite a long time compared to the last time we ever did >> a similar upgrade 2 years ago. >> >> Has anyone had a similar experience and should this be the case? >> > > Depends on the code releases you're crossing, it will need to run FPGA UPDATE > and > reload the box for 2nd time. And if your device has been running for a while, > fsck > may also need to run on boot, delaying the reload time further. > > So yea, this is normal and expected. > > James > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > ________________________________ > > CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or > previous e-mail messages attached to it may contain confidential information > that is legally privileged. If you are not the intended recipient, or a > person responsible for delivering it to the intended recipient, you are > hereby notified that any disclosure, copying, distribution or use of any of > the information contained in or attached to this transmission is STRICTLY > PROHIBITED. If you have received this transmission in error please notify the > sender immediately by replying to this e-mail. You must destroy the original > transmission and its attachments without reading or saving in any manner. > Thank you. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
