In my experience G0 is always a management interface.
From: cisco-nsp <[email protected]> On Behalf Of Martin T Sent: Wednesday, October 24, 2018 10:27 AM To: [email protected] Subject: [c-nsp] Has there been a Cisco network device with GE management port while other ports are FE or lower? Hi, I need to know, if GigabitEthernet0(returned by SNMP ifDescr)/Gi0(returned by ifName) is a Management Ethernet interface or not. My assumption is that Cisco has never made a network device, where Management Ethernet is a 1GigE port while non-management port(s) are Ethernet or Fast Ethernet ports. In other words, if device has any other Gi ports besides GigabitEthernet0, then GigabitEthernet0 is always a Management Ethernet port? thanks, Martin _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp> archive at http://puck.nether.net/pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
