Hi,
i got two ethernet-links, - one between me-3800'x and - one between me-3800 and asr920. They have been created doing mpls-xconnect's. Connecting my own "CE2.0" CPE's, - on the first link, my OAM's find their way, everything OK. - On the Circuit with the asr920, the OAM's don't come out on the other end, so my NNI Ports are marked "down". (disabling OAM, LLDP neighborhood comes up, my inband-mgmt is working, ...) I do not have access to those devices from our carrier, and have not got exact model and IOS Version. Is there any special to configure? Something like "l2cp tunnel all" ? (I found "transparent-cfm" but this is in the context of CarrierEthernetConfig and not MPLS.) I hope that STP BPDUs will be transported (in both directions) over that xconnect. Thank you for any ideas, Juergen. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
