Hello everyone, I have a question about OSPF route redistribution. We have no issues redistributing subnets in the network out of our /19 blocks. But we have a /22 block that the entire /22 is allocated to a single client. The routes redistribute across all the all switches except back to the edge routers that announce them via BGP to our upstream carriers. This being because there are holdown routes for the BGP on this of the same size IP block. Is there a way to allow the /22 block to propagate to the edge routers and still maintain the hold down routes we need to announce that /22 via BGP to our various upstream carriers?
Edge routers are configured as such: router static address-family ipv4 unicast 45.x.x.0/22 Null0 19 router bgp ASNUMBER address-family ipv4 unicast network 45.x.x.0/22 router ospf NUMBER log adjacency changes redistribute connected redistribute static area W.X.Y.Z ! interface TenGigE0/3/0/0 passive disable ! interface TenGigE0/3/3/0 passive disable ! Any ideas are greatly appreciated. -Lee _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
