What is the type of link between the devices - does it support multicast? What happens is you use the neighbor command to force unicast?
Please provide configrations and run "sh eigrp plugins" on both to check versions. Also check "sh ip eigrp events" And then turn on debugs debug ip eigrp neighbor -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Aaron Gould Sent: Thursday, August 24, 2017 11:48 AM To: [email protected] Subject: [c-nsp] cisco 3850 eigrp - sending goodbye - can't ping any 224.0.0.10 I was just working with a customer that has a 3850 - 24 port that continually sends goodbye tlv every 80 seconds He also has a 3850 48 port that works fine The 3850 24 port can NOT ping 224.0.0.10 at all The 3850 48 port can ping 224.0.0.10 and gets responses from all the eigrp neighbors on the vlan Router eigrp 1 configs are same - Aaron Gould _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
