Just a follow-up. Po interface is a L3 channel with subinterface po631.2310 configured, adding filter vlan 2310 solved the problem.
On Wed, Aug 16, 2017 at 7:53 PM, Urmanov Maxim <[email protected]> wrote: > Hello, try to add "switchport monitor" for span destination port, it > should work > > 16 авг. 2017 г. 1:40 ПП пользователь "Andriy Bilous" < > [email protected]> написал: > >> Hello, >> >> I am trying to configure SPAN session with port-channel interface as the >> source >> >> monitor session 2 >> source interface port-channel631 both >> destination interface Ethernet5/30 >> no shut >> >> However on the sniffer I see only locally generated frames - CDP, LLDP, >> UDLD and no transit traffic. Am I missing something? >> >> sh ver | i system: >> system: version 6.2(14) >> >> >> Thanks >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
