I'm pretty sure you need a PFC 3C or higher. The 3B on that Sup720 won't work.
Chuck -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Youssef Bengelloun-Zahr Sent: Tuesday, May 30, 2017 8:29 AM To: [email protected] Subject: [c-nsp] Minimum hardware and version to run VSS Dear C-NSP community, I have a client that's running the following gear in their campus : Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP 2 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE 3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP 4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX 5 2 Supervisor Engine 720 (Hot) WS-SUP720-3B 6 2 Supervisor Engine 720 (Active) WS-SUP720-3B 7 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX 8 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX 9 48 CEF720 48 port 10/100/100 with version : Version 12.2(18)SXF16 IP Services ! Yes, I know right !?! He is thinking about adding some extra redundancy by adding a second chassis and migration to a VSS stack. I've tried to look for the minimum requirements to run a VSS stack through the Cisco Feature Navigator. According to it, my client is not eligible but I wanted to gather your opinions first. What do you think is the minimum requirements to meet hardware / software wize ? Thank you for your help. Best regards. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
