Hey everyone
Curious if anyone can clarify G.8032 behavior on ASR9K IOS-XR or even IOS-XE on an ASR920. Trying to turn up G.8032 with a few Calix E7 shelves in the mix. The Calix E7s confirm strictly to the standard. The destination MAC for R-APS messages are sent to and expected to be received on multicast address 01-19-A7-00-00-[Ring ID] Looks like the ASR9K's are sending the R-APS messages to the G.8032 ver 1 default MAC of 01-19-A7-00-00-01 Is there anyway of manipulating this Ring ID on IOS-XR or IOS-XE? Is the Ring ID the same thing as the APS Message Level on Cisco? I don't see the APS Message Level described in the standard but its a required config on the Cisco gear. I can change this value from 0-7. Their documents don't go into detail on that matter. Any input would be greatly appreciated. Thanks, Tim Calvin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
