Hi, I’ve been a big fan of Observium for a number of years, but recently I’ve been looking to switch to LibreNMS as they tend to be a little faster at building support for new equipment.
You might find either one would fit your needs. The pay features in Observium are included in LibreNMS (which is free). > On Feb 2, 2017, at 11:26 PM, Rahman Fazlur <[email protected]> wrote: > > Hello everyone, > > I am looking for some recommendations about network monitoring tools (open > source or commercial). This is a MPLS Network with around 300 clients. > L3vpn and L2vpn running. There are some central vpn services as well. > > There are no te tunnels. > > Device list are > > ASR 9k (9004) > ASR 100X > ISR 4000 series > > The requirements are. > > 1. Monitor client wan link with utilization. > 2. Monitor PE devices and core devices. cpu, , memory, snmp trap with email > altert, etc. > 3. Monitor VPN routes, performance? anything else.. > 4. Good to have lot of dash board options (like cacti weathermap , etc) > 5. Capacity reporting. > > > What is the best tool to provision the CPE (APIC-EM ?) as well. Any advice > will be great. > Both primary and secondary CPE run mpls. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
