Pretty much as youve said.
Asa works fantasticly well with v6 ... including ospfv3 and v6 tunnelling
for.anyconnect.
Sent from my Samsung device
-------- Original message --------
From: Michael Lee <[email protected]>
Date: 20/08/2016 10:56 p.m. (GMT+00:00)
To: [email protected]
Subject: [c-nsp] ASA for IPv6
Hi,
Currently I have ASA 5580 with IPv4 NAT setup (public IP outside and RFC
1918 inside), I am considering to run IPv6 with Public IPv6 outside and
Public IPv6 inside (routing mode)
Just wondering there is anything I would need to consider except CPU,
memory and sessions)
Thanks,
~mike
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
