> On Jun 7, 2016, at 4:00 PM, Mark Tinka <[email protected]> wrote: > > > > On 7/Jun/16 21:54, Adam Vitkovsky wrote: > >> >> >> My understanding is that in MPLS it really depends on the default >> behaviour of the edge device, that is whether it tries to interpret >> incoming PDUs or it doesn't care and forwards or drops them. >> James mentioned that ASR9xx family does try to make sense of incoming >> PDUs by default (or possibly dropping). >> ASR9K family on the other hand forwards by default. > > Since the ASR920 requires EFP's for even port-mode EoMPLS, I have not > really tested whether Layer 2 PDU's are automatically passed with > "encapsulation default". My initial guess would be no, because the pw is > on an EFP, but I'd need to check to be sure. > > On an ME3600X/3800X, all Layer 2 PDU's are passed without question in > classic port-mode EoMPLS, i.e., "xconnect" command on the physical > interface. > > L2PT has typically between required for VLAN-mode EoMPLS.
Yeah. What he said seconds before I said it :p _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
