Hi, ME3600 is has very small default egress queue.
Here's something you can do. queue-limit percent 100 is valid since 15.2. policy-map logical class class-default service-policy leaf policy-map large-queues class class-default service-policy logical policy-map leaf class class-default queue-limit percent 100 interface GigabitEthernet0/X service-policy output large-queues Fredrik Vöcks CNO On 16 March 2015 at 10:30, Plawansai RMUTT CPE IX <[email protected]> wrote: > #sho platform port-asic stats drop gigabitEthernet 0/5 > > Interface Gi0/5 TxQueue Drop Statistics > Queue 0 > Weight 0 Frames 0 > Weight 1 Frames 0 > Weight 2 Frames 0 > Queue 1 > Weight 0 Frames 0 > Weight 1 Frames 0 > Weight 2 Frames 0 > Queue 2 > Weight 0 Frames 0 > Weight 1 Frames 0 > Weight 2 Frames 0 > Queue 3 > Weight 0 Frames 0 > Weight 1 Frames 0 > Weight 2 Frames 223677075 > > > > #sho platform qos statistics interface gi0/5 > GigabitEthernet0/5 (All statistics are in packets) > > dscp: incoming > ------------------------------- > > 0 - 4 : 1144255751 68 99134 0 1041 > 5 - 9 : 39 10 25 1975 0 > 10 - 14 : 3943 0 3 0 5425 > 15 - 19 : 0 223 0 68 0 > 20 - 24 : 53 0 0 1 13810 > 25 - 29 : 0 6 0 8 27 > 30 - 34 : 0 0 155 0 2 > 35 - 39 : 0 2 0 0 33 > 40 - 44 : 0 0 0 0 2 > 45 - 49 : 0 0 1 79353 125 > 50 - 54 : 575 7 234 40 80 > 55 - 59 : 8 0 1 0 0 > 60 - 64 : 1 1 24 2 > dscp: outgoing > ------------------------------- > > 0 - 4 : 568408678 1837 109021 14342416 4521 > 5 - 9 : 20734 1082 340 407027 9 > 10 - 14 : 423559649 110 108 5 3020882 > 15 - 19 : 1 51289 0 9284 0 > 20 - 24 : 23280 0 20 1 341 > 25 - 29 : 0 215 0 2311 1493 > 30 - 34 : 5 0 4011 1 50 > 35 - 39 : 0 47 0 2 2196 > 40 - 44 : 44 5 4 0 45 > 45 - 49 : 2052 406 2 26162 5 > 50 - 54 : 287 30 15 277 366 > 55 - 59 : 1 1397 1 2 0 > 60 - 64 : 3 6 3733 42 > cos: incoming > ------------------------------- > > 0 - 4 : 1144533605 0 0 0 0 > 5 - 7 : 0 0 0 > cos: outgoing > ------------------------------- > > 0 - 4 : 1010005892 0 0 0 0 > 5 - 7 : 0 0 0 > output queues enqueued: > queue: threshold1 threshold2 threshold3 > ----------------------------------------------- > queue 0: 0 0 0 > queue 1: 0 16347 2459761 > queue 2: 0 0 0 > queue 3: 0 0 1010070312 > > output queues dropped: > queue: threshold1 threshold2 threshold3 > ----------------------------------------------- > queue 0: 0 0 0 > queue 1: 0 0 0 > queue 2: 0 0 0 > queue 3: 0 0 6486 > > > > #sho cdp nei gi0/5 > Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge > S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone, > D - Remote, C - CVTA, M - Two-port Mac Relay > > Device ID Local Intrfce Holdtme Capability Platform Port ID > AY-CDC882_17 Gig 0/5 129 R S I 1841 Fas 0/0 > > > > #sho int status | inc 0/5 > Gi0/5 CDC882_AYAY connected 520 a-full a-100 > 10/100/1000BaseTX > > > > How should I do? > > > > Thank you very much. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
