Hello Mihai, Looks like you are trying to do Profile 20 : Rosen-P2MP-TE with BGP AD/PIM C-multicast Routing. But that one doesn't seem to be supported unfortunately (I'm so disappointed -as that should have been one of the first modes supported). And looking at the config guides there doesn't seem to be any progress on this. Things might have changed in 5.3 as the whole table listing summary of supported MVPN Profiles disappeared and is replaced with a simple list that happens to mention Dynamic P2MP-TE tunnels -but if it's for just data or also for default MDT??? Though at the beginning of the list there's: Default-MDT with mLDP P2MP trees and with Static P2MP-TE tunnels -so I'm sceptical.
adam > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > Mihai > Sent: 28 February 2015 16:25 > To: [email protected] > Subject: [c-nsp] IOS-XR 5.2 NG-MVPN > > Hello, > > Could someone enlighten me why an ASR9k doesn't generate an I-PMSI in > the below configuration? I am trying to configure a NG-MVPN between > Cisco ASR9K and Juniper MX using RSVP-TE. > > multicast-routing > address-family ipv4 > mdt source Loopback10 > ! > ! > vrf mihai > address-family ipv4 > mdt source Loopback10 > core-tree-protocol rsvp-te > export-rt 200:200 > import-rt 200:200 > interface all enable > bgp auto-discovery p2mp-te > receiver-site > ! > mdt default p2mp-te attribute-set p2mp-te-default-set > ! > ! > ! > vrf mihai > vpn id 200:200 > address-family ipv4 unicast > import route-target > 200:200 > ! > export route-target > 200:200 > ! > ! > ! > router bgp 65100 > mvpn > bgp router-id 2.2.2.2 > address-family vpnv4 unicast > ! > address-family ipv4 mvpn > global-table-multicast > ! > neighbor 1.1.1.1 > remote-as 65100 > update-source Loopback10 > address-family vpnv4 unicast > ! > address-family ipv4 mvpn > ! > ! > vrf mihai > rd 200:200 > address-family ipv4 unicast > network 10.10.10.1/24 > ! > address-family ipv4 mvpn > > > RP/0/RSP0/CPU0:asr9k1(config)#do sh bgp ipv4 mvpn neighbors 1.1.1.1 > advertised-routes > Sat Feb 28 18:15:28.205 EETDST > RP/0/RSP0/CPU0:asr9k1(config)# > > > Juniper is advertising the I-PMSI: > > RP/0/RSP0/CPU0:asr9k1(config)#do sh bgp ipv4 mvpn | begin Distinguisher: > Sat Feb 28 18:14:24.500 EETDST > Route Distinguisher: 200:200 (default for vrf mihai) > *>i[1][1.1.1.1]/40 > 1.1.1.1 100 0 i > Route Distinguisher: 200:201 > *>i[1][1.1.1.1]/40 > 1.1.1.1 100 0 i > > Processed 2 prefixes, 2 paths > > Thanks, > Mihai > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ --------------------------------------------------------------------------------------- This email has been scanned for email related threats and delivered safely by Mimecast. For more information please visit http://www.mimecast.com --------------------------------------------------------------------------------------- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
