Just wondering whether you could also see input drops if the fabric/ port you want to egress is full....
Sent from a mobile device > On 21 Oct 2014, at 12:42, PlaWanSai RMUTT CPE IX <[email protected]> > wrote: > > k1#sho int te1/4 | inc dro > Input queue: 1/75/3907395/3653900 (size/max/drops/flushes); Total output > drops: 0 > > k1#sho int te1/4 | inc rat > Queueing strategy: fifo > 30 second input rate 3,570,331,000 bits/sec, 365776 packets/sec > 30 second output rate 496789000 bits/sec, 231843 packets/sec > k1#sho int te1/3 | inc rat > Queueing strategy: fifo > 30 second input rate 1,752,208,000 bits/sec, 185679 packets/sec > 30 second output rate 257731000 bits/sec, 122720 packets/sec > k1#sho int te1/2 | inc rat > Queueing strategy: fifo > 30 second input rate 3,602,173,000 bits/sec, 425089 packets/sec > 30 second output rate 2326376000 bits/sec, 351745 packets/sec > k1#sho int te1/1 | inc rat > Queueing strategy: fifo > 30 second input rate 371,024,000 bits/sec, 175235 packets/sec > 30 second output rate 2565494000 bits/sec, 291311 packets/sec > > Traffics are we trying to put through this card about 9 Gbps. > > k1#sho int te1/4 | inc dro > Input queue: 1/75/3910272/3656732 (size/max/drops/flushes); Total output > drops: 0 > > Thank you very much. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
