Dave McGuire <[email protected]> writes: > Hey folks, new listmember here. Greetings to everyone; I'm sure I'll > see some familiar names here. > > I'm wondering if someone can clear something up for me. I have a > 7206VXR with an NPE-G1 with 1GB of RAM, running > "c7200-adventerprisek9-mz.151-4.M2.bin". I am doing some IPsec tunnels > and everything works great. > > I picked up an SA-VAM2 module recently, which from everything I can > find should function in this configuration. However, "sh diag" reports > this module as "disabled unsuitable deactivated powered off". As > evidenced by the module's LEDs at boot time, it powers up momentarily > and then powers down. > > I think it ought to be working; I'm guessing I've missed something. > Possibly something rather stupid. ;) Can anyone point me in the right > direction? I appreciate any advice from the collective sage wisdom of > cisco-nsp.
Have you tried feature navigator? I see documentation that an SA-VAM2 should work with an NPE-G1, but the "Last Date of Support" for that board was April 29, 2011... I would not be too sanguine about support for it at all in 15.1. -r _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
