On 09/25/2014 5:15 pm, Gert Doering wrote:
Hi,
On Thu, Sep 25, 2014 at 12:33:38PM -0700, Prabhu Gurumurthy wrote:
As long as there is only one interface that is up with the IP address,
Cisco should NOT complain about the duplicate IP.
You might want to try this :-) - it will disallow both IPv4 and IPv6.
On a 6500, one option is to put both physical ethernet ports into the
same VLAN, and configure the IP stuff on "interface vlan X" - but if
you already have the 1GE link in place, just prepare the new config,
and have someone copy-paste it in ("interface $old / no ip address,
interface $new / ip address") while the cable is being moved...
Thanks, all. I will go ahead with Gert's suggestion and script it.
--
~Randy
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
