On Fri, 12 Sep 2014, Thomas Braun wrote:
Hi,
for MPLS to work, you need to use the following ports:
interface GigabitEthernet1/1/1
interface GigabitEthernet1/1/2
Exactly, these are the only ports that allow MPLS labeled packets, ie
these are the only ones you're allowed to configure "mpls ip" on.
--
Mikael Abrahamsson email: [email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
